Article

Training and Support

World class training and support when you need it.

Depending on your location, there are different training options available to you and your patients.

 

  • Training Centers - In some areas, training centers have been set up to give face to face training to your patients. 
  • CoaguChek Academy - Many countries offer an online eLearning option called Coaguchek Academy. 
  • Phone Support - Most countries offer excellent phone support for your patients, these patient and supportive staff are trained to walk your patients through setting up their meter and performing their first test.

 

Speak with your local support organization

To find out more about the opportunities available in your country, please contact your local Roche organization. 

Contact us
FAQ

FAQ

At least twice per month, preferably once per week.  This has proven to increase TTR by enabling faster reactions to variations in INR due to exercise and diet.  It also increases patient compliance and engagement. (1,2,3)

The percentage of time that your patient’s INR values fell within the upper and lower target value set by you.

No, calibration is performed automatically upon inserting the code key from the strip vial.

Due to diverse measurement standards used by labs, small variations should be expected. If the variation is of therapeutic significance, please contact your local Roche support organization.

Single sealing of strips is done to prevent the chemistry from moisture and light, and to maintain a shelf life as long as possible. However, it is less convenient for the customer and more expensive for the manufacturer. Each test strip vial consists of a stopper with desiccant which prevents the test strips from moisture and light.

Polyglobulism: Hematocrit outside the standard range (25-55%)
Lupus anticoagulant: INR abnormally high
The presence of anti-phospholipid antibodies (APAs) such as Lupus antibodies (LA) can potentially lead to prolonged clotting times, i.e. elevated INR values. A comparison to an APA-insensitive laboratory method is recommended if the presence of APAs is known or suspected.

The open vial stability is 10 minutes maximum. Having the strip too long out of the vial, especially in situations with high humidity or temperature, would be detected by the onboard integrity system resulting in an error message. No INR would be displayed if the strips are found to be defective by the integrated quality control of the CoaguChek XS system.

CoaguChek XS, XS Pro, Pro II
If the incorrect code key is in the machine, the PT/INR value may be incorrect. Depending on the lot variation, the error can be significant causing the wrong therapeutic decision to be taken with an adverse health effect.

 

CoaguChek XS Plus
If the incorrect code key is in the machine and you insert a test strip, a display message indicates that you need to insert the corresponding code key, otherwise a measurement will not be possible.

CoaguChek XS, XS Pro, Pro II
Major differences are:

  • amperometric (electrochemical) detection method instead of dancing particle,
  • size and weight,
  • auto-power on,
  • sample application point outside the meter,
  • Infra-Red interface

and the existence of professional models: the CoaguChek XS Plus and Pro

Beside the mentioned technology the differences are:

  • top and side dosing capability,
  • strip storage at room temperature,
  • extended % Quick measuring range,
  • the low ISI value of 1.0,
  • heparin insensitivity at therapeutic levels

and the onboard single-channel control system (OS2C) = integrity check on each strip in the same channel where blood passes, which makes it unnecessary to run liquid controls.

In the measuring channel a chemical called resazurin is incorporated. Resazurin is sensitive to ambient factors like light, humidity and temperature leading to a reaction process where Resazurin is converted into Resorufin. The concentration of Resorufin is measured electrochemically, and the result is a direct measure of strip alteration.

The fill of the capillary is detected by a current flow between two electrodes on the test strip. If the capillary is not completely filled an error message (error number 5) will appear on the display.

CoaguChek XS

Never add more blood to the test strip after the test has begun or perform another test with blood from the same puncture site. Yes, re-dosing is possible within 15 seconds. However, in principle re-dosing is very critical due to the immediate start of the coagulation process. Therefore this should be avoided if possible.

 

CoaguChek XS Plus, XS Pro, Pro II

Yes, re-dosing is possible within 15 seconds. However, in principle re-dosing is very critical due to the immediate start of the coagulation process. Therefore this should be avoided if possible.

CoaguChek XS

An error message (error number 4) will appear on the screen.

 

CoaguChek XS Plus, XS Pro, Pro II

An error message will appear on the screen.

The user can erase the entire memory. One cannot however, erase individual results.

The meter has a built in internal quality control so liquid controls are not needed.

In principle, yes. However, the CoaguChek XS Plus or Pro systems are much more suitable solutions in a professional setting due to the data management capabilities created for professionals:

  • positive strip lot identification
  • the ability to input patient and operator id to facilitate record keeping
  • touch screen
  • and a search function for patient data in the memory

The CoaguChek XS Plus or Pro systems are the ideal choice for you when accuracy and ease  of use need to be combined with data management.

  1. Guyatt et al (2012). Chest 141:7S-47S
  2. Heneghan et al (2012). Lancet 379:292-293
  3. Heneghan C, Alonso-Coello P, Garcia-Alamino JM, Perera R, Meats E, Glasziou P. Self-monitoring of oral anticoagulation: a systematic review and meta-analysis. Lancet 2006; 367:404-411