User Profile
Select your user profile
Artikel

Firmware update

Keep your CoaguChek INRange up-to-date

 

Before you download the firmware please read the disclaimer:

The firmware has been released by Roche Diagnostics in all countries accepting the CE mark. Roche Diagnostics is committed to seek regulatory clearance in all countries where the CoaguChek® INRange meter is offered.

Please check via the local Roche Diagnostics affiliate that the firmware version has been cleared by your local regulatory authority prior to downloading the software.

 

Start the firmware update

CoaguChek INRange system

How to update your meter

The following steps describe the firmware update process for the CoaguChek® INRange system with a USB cable.

Prerequisites

  • CoaguChek® INRange meter
  • USB Type-A to Micro-USB cable (included in package)
  • Full AAA Batteries (Alkaline)
  • Windows or Mac Computer
  • Firmware file provided on this page

Release note and firmware

Please read the release note before downloading the firmware update file.

Release note

WARNING

Before you download the firmware update file please read the disclaimer:

The firmware has been released by Roche Diagnostics in all countries accepting the CE mark. Roche Diagnostics is committed to seek regulatory clearance in all countries where the CoaguChek® INRange meter is offered.

Please check via the local Roche Diagnostics affiliate that the software version has been cleared by your local regulatory authority prior to downloading the software.

Follow the steps below to update your device

Follow the steps below to update your device

Step 1.1

1.1

  • Insert batteries
  • Power on CoaguChek® INRange meter,  press on/off button
Step 1.2

1.2

  • Go to Menu > Other, press arrow down button
  • Select Menu > Other, press enter button
Step 1.3

1.3

  • Go to Firmware Update, press arrow down button
  • Select Firmware Update, press enter button
Step 2.1

2.1

  • Make sure the computer is powered on and the user is logged on
  • Connect the micro-USB cable to the meter
Step 2.2

2.2

  • Connect the micro-USB cable to the computer
  • Display on meter will show "For Firmware Update copy file to INRange-Drive"
Step 3.1

3.1

  • Download the update file to your computer (if not already done)
  • Make sure to unzip the update file first
  • Locate the update file in Windows Explorer or Finder (Mac)
  • Select the update file, for example "Update0l.04.12-YT.znu"
  • Right click on the update file "Update0I .04.12-YT.znu" and select "Copy"
Step 3.2

3.2

  • Locate your CoaguChek® INRange meter in your Windows Explorer or Finder (Mac). It will be displayed as a local drive, for example like a USB memory stick
Step 3.3

3.3

  • Select your CoaguChek® INRange meter in your Windows Explorer or Finder (Mac)
  • Right click inside CoaguChek® INRange folder and select "Paste"
Step 3.4

3.4

  • The update process has started
Step 3.5

3.5

  • The CoaguChek® INRange will execute the update automatically within several minutes
  • The display will automatically change during the update process
Step 4.1

4.1

  • Wait until the meter automatically powers off after the update process
  • Turn on the meter. Press on/off button
Step 4.2

4.2

  • Go to Menu > Other, press the arrow down button
  • Select Menu > Other, press the enter button
Step 4.3

4.3

  • Select About, press the enter button
  • Check for correct firmware version, for example "Update01.04.12-YT"


If the firmware listed on the display is still the old version, the update has failed. Please try again to update the CoaguChek® INRange meter by repeating the steps described. Please contact Roche Diagnostics, if the update keeps failing.