navify Pass offers a data-management solution which allows allows safe sharing and storing of test-result data for both professional users and test-recipients.
Simple to perform and fast results within 15 – 30 min*
Collection of nasal sample
While rotating the swab, insert the swab 2 cm (slightly less than 1 inch) parallel to the palate (not upwards) towards the throat into one nostril until resistance is met at turbinates. Do not apply pressure. Rotate the swab 4 times for about 15 seconds in total against the nasal wall and remove it from the nostril. Repeat in the other nostril using the same swab.
Insert the swab into an extraction buffer tube. While squeezing the buffer tube, stir the swab at least 10 times. Remove the swab while squeezing the sides of the tube to extract the liquid from the swab. Press the nozzle cap tightly onto the tube.
Apply 4 drops of extracted specimen to the specimen well of the test device.
WARNING!
Dispense the specimen at 90 degree angle to allow for free-falling drops drops and avoid bubbles.
Read the test result at 15 to 30 minutes.
WARNING!
Test results that are read before 15 minutes or after 30 minutes may be incorrect.
WARNING!
Failure to squeeze the tube can lead to incorrect results.
* Before using the SARS-CoV-2 Rapid Antigen Test 2.0 Nasal, carefully read the Instructions for Use and all included warnings and precautions.
Test results are quick and easy to read
Positive test result
If both colored lines C and T are visible, even if they are faint or not uniform, the test result is positive. This means the test detected the virus protein in the sample. The tested person is very likely infected with SARS-CoV-2.
Control line C: Indicates that the test is working correctly
Test line T: Visibile if SARS-CoV-2 antigen was detected
A visible control line C alone means the test worked correctly. The test result is negative. No virus protein could be detected in the sample. The tested person is unlikely infected with SARS-CoV-2.
If a control line (C) is not visible, or only the line marked with a T, the result must be considered invalid. The test is not working correctly and you should perform another test using a different test kit.
Each kit contains 25 individually packaged, ready-to-use tests.
The following components are needed for a test and included in the kit:
The SARS-CoV-2 Rapid Antigen Test 2.0 Nasal is equipped with a 2D data matrix code and a unique identifier printed on each test cassette. The 2D code is compliant with the common industry standard GS1 and thus can be read and interpreted by any IT system compatible with standard 2D data matrix codes.
The 2D data matrix code is unique to each test device.
The following elements are encoded in a digitally readable format:
The unique identification of each test device enables a one to one assignment of test results to individual persons. This facilitates storage of test results under the respective patient ID in Electronic Medical Records. A digital readout of the data matrix code can lead to more efficient processes, especially in testing environments
with a high throughput.
References
*Relative sensitivity and relative specificity are compared to RT-PCR.