BenchMark ULTRA PLUS

IVD For in vitro diagnostic use.
BenchMark ULTRA PLUS

Deliver diagnostic confidence with BenchMark ULTRA PLUS

The BenchMark ULTRA PLUS system uses an unprecedented, fully-automated workflow for immunohistochemistry (IHC) and in-situ hybridisation (ISH) slide staining to improve turnaround time and decrease touchpoints. With over 200 assays in key disease areas available, including high medical value assays, your lab can remain at the forefront of companion diagnostics and personalised medicine.

Built upon the proven technology of the BenchMark ULTRA system, BenchMark ULTRA PLUS delivers an enhanced lab experience and an optimised workflow with flexible solutions. This easy-to-use solution helps histotechnologists and anatomic pathology laboratories manage activities efficiently and confidently, saving on personnel time and resource costs.

Lab technologist in pathology lab using the automated slide scanner BenchMark ULTRA PLUS
Benefits at a glance

Benefits at a glance

Image of colour-coded bulk reagent clips on the BenchMark ULTRA Plus that makes it easy to see high-level instrument status.

Improve usability while enabling time for more value-added activities through:

  • Light notifications that communicate instrument status from across the lab
  • New retractable work surface that gives technologists additional space to work while at the instrument
  • Bulk reagent colour-coded clips that make bulk reagent loading easier and help minimise errors
  • New remote access that allows you to view, manage, complete and print system data remotely
  • New integrated communication that allows streamlined data management and inventory tracking across all host computers
Image of the integrated touchscreen on the BenchMark ULTRA plus that simplifies real-time run management

Features based on customer feedback:

  • A decreased height compared to the BenchMark ULTRA configuration
  • New integrated touchscreen reduces bottlenecks by allowing many functions to be done at the instrument
  • VSS 14.x software allows for easier navigation of inventory management and ordering through a new filter as well as lot-to-lot validation on the same instrument
  • New proprietary waste management* solution degrades DAB (3,3'-diaminobenzidine) to less than 5 ppb meeting the most stringent local authority requirements for non-hazardous waste
Image of stained microscope slide being loaded into a drawer on the BenchMark ULTRA plus

Proven BenchMark technologies deliver the right stain at the right time:

  • Flexible, independent temperature control for individual slide staining optimisation
  • Proven staining technology of air vortex mixing with LCS create a reaction chamber allowing full slide coverage with 100ul of reagent
  • New slide drawer design mitigates fluid ingress and egress resulting in continuous and highly-reliable drawer performance
  • VSS 14.x software has new and expanded reporting capabilities including quality assurance/quality control (QA/QC)

Related categories

Downloads

Use left and right arrow keys to scroll between the tabs

Contact us

Overview

Ordering Information

View Full Table
close
Product specification Value
General characteristics
Fully automated Baking, deparaffinisation, cell conditioning and staining, including IHC, ISH, SISH, immunofluorescence, multiparameter IHC staining (dual, triple), counterstain and titration
Slide position 1–30 slides with independent processing/functionality and temperature control for each position
Reagent carousel 35 reagent positions
Slides 25 x 75 mm, 1 x 3 mm or 26 x 76 mm positively charged slides
Bulk solutions Up to 7 different bulk solutions can be changed without process interruption Only required bulk reagents needed on board
Waste Two 20 L carboys for processed aqueous waste Two 5 L bottles for separated LCS waste Virtually undetectable DAB in waste: <5 parts per billion
DI water supply NCCLS Type II water or equivalent (deionised water)
Temperature control Ambient to 100°C
Modularity 1 to 4 BenchMark ULTRA PLUS instruments may be controlled from one BenchMark ULTRA PLUS computer system
Configuration Freestanding
Certifications EN 61010-1, IEC/EN 61010-2-010, IEC/EN 61010-2-101, EN 61326-2-6
Catalogue number N750-BMKU-FS 05342716001
Environmental requirements
BTU/Hour output 400 BTU/Hr idle, 1000 BTU/Hr running
Room temperature 20°C to 32°C
Humidity 20% - 88% non-condensing
Physical characteristics
Size (W x D x H) 111 X 89.5 X 150.2 cm
Weight Instrument with reagents: 387.8 kg full fluids, bulk, reservoirs and UV. Instrument dry: 275 kg
Clearances Top 42.2 cm
Sides 10.2 cm
Rear 15.2 cm
Electrical specifications
Voltage ~100–240V
Current 5-10 Amps
Frequency
 50/60 Hz

Technical Documents

Access important product documentation including relevant certificates and other resources.

After clicking below, you will be redirected to eLabDoc, where you can select your local country-specific documents.
Document repository artboard
error errorMessage
Sorry, we couldn't find the content you are looking for
Please try again later

Key features

  • Remote connectivity
  • Fewer instrument touchpoints
  • Software interface usability
  • On-instrument run management capabilities
  • Electronic inventory management
  • Quality assurance
  • Useful reporting metrics

Automated IHC/ISH slide stainers comparison overview

BenchMark ULTRA PLUS
BenchMark ULTRA
BenchMark GX
Automation
Baking, deparaffinization, cell conditioning and staining, including IHC, ISH, SISH, immunofluorescence, multiparameter IHC staining (dual, triple), counterstain and titration
Baking, deparaffinization, cell conditioning and staining, including IHC, ISH, SISH, immunofluorescence, multiparameter IHC staining (dual, triple), counter stain and titration
Baking, deparaffinization, cell conditioning and staining, including IHC, ISH, SISH, immunofluorescence, multiparameter IHC staining (dual, triple), counter stain and titration
Throughput
Approximately 90 slides in 8 hours (standard IHC samples)
Approximately 90 slides in 8 hours (standard IHC samples)
Approximately 40 slides in 8 hours (standard IHC samples) Approximately 20 slides in 8 hours (standard ISH samples)
Slide position capacity
1–30 slides with independent processing/functionality and temperature control for each position
1–30 slides with independent processing/functionality and temperature control for each position
1-20 slides with independent temperature control for each position
Reagent capacity
35 reagent positions
35 reagent positions
25 reagent positions
Waste degradation
Two 20 L carboys for processed aqueous waste Two 5 L bottles for separated LCS waste Virtually undetectable DAB in waste: <5 parts per billion
Two 20 L carboys, can be changed “on the fly” without process interruption
One 20 L carboy

Related products

...
    ...

    Contact us

    Do you have questions about our products or services? We’re here to help. Contact a Roche representative in your region.

    VENTANA is a trademark of Roche.