BenchMark Special Stains system
Empowering Special Stains with consistent quality, workflow efficiency and improved safety through automated slide staining and ready-to-use reagents.
IVD
For in vitro diagnostic use.
The BenchMark Special Stains system enhances workflow with proven technology
The BenchMark Special Stains system offers advanced automation for histology special stains. By fully automating the process from baking to staining, the BenchMark Special Stains system enables the consistent and efficient quantitative detection of targets, aiding accurate diagnosis.
Productivity features such as the ability to run any test next to any other test and waste fluid sensing optimize workflow. Reducing manual processes and improving lab capabilities allows your skilled laboratory professionals to focus on higher-value contributions.
Additionally, an intuitive user interface (Ventana System Software) connects up to eight BenchMark Special Stains and IHC/ISH instruments, enabling seamless integration and easy adoption for lab personnel.
The clinical value of special stains
playicon
videoCtrl
/
fullScreen
Update Required
To play the media you will need to either update your browser to a recent version or update your
Flash plugin.
Special stains assay menu
Use left and right arrow keys to scroll between the tabs
Overview
General characteristics
View full tableGeneral characteristics
| Parameter | Value |
| Fully automated | Baking, deparaffinization and staining of Special Stains |
| Slide carousel | 1–20 slides with independent temperature control for each position |
| Reagent carousel | 25 reagent positions |
| Slides | 25 mm x 75 mm or 26 mm x 76 mm Superfrost Plus |
| Bulk fluids | Up to four bulk fluids in 3-6 L on-board containers |
| DI water quality specifications | Clinical and Laboratory Standards Institute (CLSI) guideline C3-A4 Clinical Laboratory Reagent Water (CLRW) |
| Modularity | 1–8 BenchMark instruments may be controlled from one PC |
| Configuration | Free standing or modified benchtop installation |
| Certifications | CSA, EMC, CE compliant |
| Ordering code | 06657389001 |
Temperature control
View full tableTemperature control
| Parameter | Value |
| Instrument operational temperature | 37°C–75°C (98°F–167°F) |
Environmental requirements
View full tableEnvironmental requirements
| Parameter | Value |
| Heat | 1200 BTU/Hr |
| Operating temperature | 15°C to 30°C (64°F to 90°F) |
| Humidity | 20% to 80%, non-condensing |
Electrical specifications
View full tableElectrical specifications
| Parameter | Value |
| Voltage | 100 VAC +/- 10% (Japan), 120 VAC +/- 10% (US & Canada), 230 VAC +/- 10% (Europe) |
| Current | 4 Amps |
| Frequency | 50/60 Hz |
| Power connection | Standard 3-prong grounded |
| Fuse | Waste module: 6.3 Amps, 250 Volts, 5 mm x 20 mm, fast acting |
Instrument physical characteristics
View full tableInstrument physical characteristics
| Parameter | Value |
| Size (W x D x H) | 50.8 cm x 63 cm x 135.4 cm (20 in x 25 in x 53.3 in) |
| Weight | 76.7 kg (165.7 lbs) |
| Clearances | Rear 15.2 cm (6 in) Top 30.5 cm (12 in) Left side 7.6 cm (3 in) Right side 61 cm (24 in) to open door to 90° Right side 101.6 cm (40 in) to open door to 180° Front 108 cm (42.5 in) |
